- Provides a clean modular surface mount outlet solution of voice, data, and other communication needs to the work area for commercial or residential applications- Multiple mounting options including adhesive backings, magnets, and screws- Recessed area for ID label- Rugged and durable construction- Accomodates a wide variety of easy to snap-in modules, providing configuration flexibility- Accepts all IC107 modules

- HANDSET CORD 6' ASH

- Displays “ringing”, “on-the-phone” or “message waiting”- LED visible up to 100 ft (30m)- Power supply included- Attractive new compact package- Connects with a modular cord- Special “T” adapter provided for handset applications- Easy to install - Power: 120VAC / 12VDC 500mA, UL listed adapter provided- Dimensions: 76mm x 112mm x 36mm (3.0” x 4.4” x 1.4”)- Shipping Weight: 0.68kg (1.5lbs)- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity- Light: 19mm (0.75”) red LED- Visiblity: 30m (100 ft) typical- Message Waiting Voltage: 90V - 125V- Connections: (1) RJ11 jack,(4) cage clamp screw terminals - Great for:- Households- Call centers- Telemarketing- Product support groups- Office cubicles- CO based voice messaging- Purchasing departments- Sales offices

- Suttle loud indoor/outdoor bell- Modular bells and ringers are ideal for factories, farms, offices or any location where an audible signaling device is needed- Contains a modular jack that accepts line cords for plug-in installation and is available in single-line only- 45-130 VAC Ringing Voltage- 90dB- Mechanical ringer- Modular hook-up- Heavy duty- Two 4" bells- Ringer equivalency 1.0- 1 year manufacturer's warranty

- Flush-mold-injected booted snagless Category-5E patch cords- Suitable for high-speed data applications, including gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI- 4-pair 24 AWG-stranded copper UTP cable- 100% tested wiring sequence and continuity- Flame retardant - type CM- Exceeds EIA/TIA 568B- UL/cUL or ETL listed

- Allows an 8-ohm speaker to connect to 70V or 25V amplifier outputs- T725 Power Taps: 4, 2, 1, 1/2, 1/4, 1/8 watts- T72510 Power Taps: 10, 5, 2-1/2, 1-1/4, 5/8 watts- Easily-accessed, stripped and tinned wire terminations- Small, compact, and cost-effective

- Modular coiled handset cord with 4" lead- Dark Gray

- 500' Speakerwire 18 Gauge 2 Conductor

- D-Sub modular adapter- Modular jack to DB-9 connector- USOC wiring chart available in ICC catalog page B-4- Female to 8 position/8 conductor

- Ivory 1 Gang Wall Plate Mounting Box- Fits standard NEMA single gang electrical boxes- Multiple mounting options including adhesive backings and screws- Integrated internal routing posts and cable management system with evenly spaced cable tie anchor points- Rear cable entry for clean external appearance- Rugged and durable construction- Accommodates ICC faceplates and inserts with screw down termination and Decora screw down inserts and faceplates, except ones with non-centered integrated F-Type connections

- Yealink Wall Bracket for T5W phones

- Vandal Resistant Features: 12 gauge 316 stainless steel faceplate with permanent laser etched graphics. Heavy duty metal keypad, hook switch, armored cable and T-10 security Torx drive mounting screws.- Weather Resistant Features: Marine grade 316 stainless steel faceplate and Torx security screws. Internally sealed keypad. Faceplate gaskets (on EWP models). Weather resistant powder paint on optional VE-5X10 surface mount box or 316 grade stainless steel on optional VE-5X10-SS surface mount box.- Ring with adjustable volume and cadence- Hearing aid compatible amplified handset with sealed push button volume control- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control- Optional RC-4A for Secure Remote Relay Control, see DOD 582- SIP compliant (see page 2 for list of compatible IP-PBX phone systems)- PoE powered (class 2, <6.5 watts)- Network downloadable firmware- 36” armored handset cable on Standard model, 54” on EWP model- Programmable to speed dial up to 250 numbers - 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228- 26 Bit Wiegand output connect to card reader input of an Access Control System- Cycles to rollover phone number on busy or no-answer- Program up to 1,000 keyless entry codes and/or proximity card numbers- Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week- Event logging with time and date stamp- Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859- Remotely programmable- Extended temperature range (-40°F to 140°F)- Zinc plated steel rough-in box included- Optional VE-5x10 and VE-5X10-SS Surface Mount Boxes, see DOD 424- Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428- Diagnostics (for testing relays)

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

- Yealink Wall Bracket for all T5S phones

- Meets ADA requirements for Emergency Phones Can automatically light the "Call Connected" LED for the hearing impaired Transmits a unique location I.D. code or voice announcement Grade 2 Braille label for the visually impaired- Non-volatile digital voice announcer with 16 seconds of voice memory- Advance call progress detection- Handsfree operation- Phone line powered- Non-volatile memory (no batteries required)- Marine grade 316 stainless steel prevents corrosion on stainless models- Dials up to 5 emergency numbers- E-1600-20A dials up to 3 non-emergency "INFO" numbers- Cycles through backup emergency and non-emergency numbers on busy or no-answer- Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859- Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command- Programmable to auto-answer on incoming calls- Remotely programmable- Extended temperature range (-15°F to 130°F)- 9 different chassis or board only available- Available in 42" tall tower phone model E-1600A-BLT-EWP (DOD# 217)- Central Station Monitoring capability (dials 2 numbers)- Optional PB-100 Polling System available (DOD# 232)- Optional BLK-3-EWP strobe light kit available (DOD# 653)

- Solid and reliable terminations for copper cabling- Featuring a minimum of 3 mm 50 micro-inch gold-plated jack contacts- Compatible with both 110 and Krone punch-down tools- Supports 22 to 26 AWG stranded and solid wire- For use with unshielded twisted pair (UTP) Cat6 network cable- Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications- Connects 24 RJ-45 ports to a network- Occupies 1U rack height- Meets 19" rackmount standards- Lifetime Warranty

- White 1 Port Decora Insert with Mounting Screws- Designed to support the distribution of voice, data, and other communication needs with contemporary styling for commercial or residential applications - Fits standard NEMA electrical boxes - Designed for a consistent look with standard decorator style faceplates - Compatible with all standard Decora faceplates - Accommodates a wide variety of easy to snap-in modules, providing configuration flexibility- UL Listed

- 1 Pair Cross Connect Wire- Dynacom cross connect wire- 1 Pair- Blue/white and white/blue- 1000 feet

- Cat 5 E White- 350MHz- Pull box- Solid

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- LC-ST Duplex MM 62.5/125 Fiber Patch Cable 5 Meter- 5 Meter- Duplex Type- LC to ST Connector Type- Multimode 62.5/125- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included

LC-ST Duplex MM 62.5/125 Fiber Patch Cable 1 Meter1 MeterDuplex TypeLC to ST Connector TypeMultimode 62.5/125Made from OFNR riser rated cables, exceeding all industry requirements, RFP typeUsed with ICC fiber optic productsTest results included

SC-SC Duplex 62.5/125 Micron MM Fiber Patch Cable2 MeterDuplex TypeSC to SC Connector TypeMultimode 62.5/125/125µmMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- Made from OFNR riser rated cables, exceeding all industry requirements, RFP type- Used with ICC fiber optic products- Test results included- 2M

LC-SC Duplex Single Mode Fiber Patch Cable10 MeterDuplex TypeLC to SC Connector TypeSingle Mode FiberMade from OFNR riser rated cablesExceeds all industry requirementsTest results includedUL listed

- Self diagnostic reports via email (testing com, mic, speaker & switch)- Automatic polling and programming software included- 2 amp relay contacts for door/gate or SL-2 strobe light control- SIP compatible- PoE powered (class 1, <4 watts)- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments- VoIP eliminates the need for "Push to Talk" mode- Network downloadable firmware- Handsfree operation- Programmable to dial up to 5 numbers on busy or ring no answer- Cycles through backup phone numbers on busy or no answer- Hangs up on busy signal, time-out or touch tone command- Remotely programmable- Extended temperature range (-30°F to 130°F)- 3 different chassis or board only available- Volume adjustments for microphone and speaker - Optional PB-100 polling system available- Optional SL-2 or BLK-4-EWP strobe light kit available